| COpenMesh::IO::_IOManager_ | This is the real IOManager class that is later encapsulated by SingletonT to enforce its uniqueness |
| CArrayItems | |
| COpenMesh::ArrayKernel | Mesh kernel using arrays for mesh item storage |
| COpenMesh::PolyConnectivity | Connectivity Class for polygonal meshes |
| COpenMesh::AttribKernelT< MeshItems, PolyConnectivity > | |
| COpenMesh::TriConnectivity | Connectivity Class for Triangle Meshes |
| COpenMesh::AttribKernelT< MeshItems, TriConnectivity > | |
| COpenMesh::ArrayKernelT | |
| COpenMesh::Kernel_OSG::ArrayKernelT< AttribKernel, MeshItems > | |
| COpenMesh::Kernel_OSG::ArrayKernelT< AttribKernel, FinalMeshItems > | Mesh kernel using arrays for mesh item storage |
| CAttribKernel | |
| COpenMesh::PolyMeshT< AttribKernel > | |
| COpenMesh::PolyMesh_ArrayKernelT< MyTraits > | |
| COpenMesh::PolyMesh_ArrayKernelT< DefaultTraitsDouble > | |
| COpenMesh::PolyMesh_ArrayKernelT< MyDeleteGeometryExampleTraits > | |
| COpenMesh::PolyMesh_ArrayKernelT< CustomTraits > | |
| COpenMesh::PolyMesh_ArrayKernelT< CustomTraitsVec2i > | |
| COpenMesh::TriMeshT< AttribKernel > | |
| COpenMesh::TriMesh_ArrayKernelT< MyTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< MyDecimaterViewerWidgetTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< MyMConvertTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< ProgTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< MeshViewerWidgetTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< MySmoothingTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< CompositeTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< Traits > | |
| COpenMesh::TriMesh_ArrayKernelT< CTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< AnalyzerTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< VDPM::MeshTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< DefaultTraitsDouble > | |
| COpenMesh::TriMesh_ArrayKernelT< MySmootherExampleTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< MyAttributesExampleTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< MyMeshSmootherExampleTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< CustomTraits > | |
| COpenMesh::TriMesh_ArrayKernelT< CustomTraitsVec2i > | |
| COpenMesh::TriMesh_ArrayKernelT< Traits > | Triangle mesh based on the ArrayKernel |
| COpenMesh::PolyMesh_ArrayKernelT< Traits > | Polygonal mesh based on the ArrayKernel |
| CBase | |
| CAnalyzerTraits::HalfedgeT< Base, Refs > | |
| CAnalyzerTraits::VertexT< Base, Refs > | |
| CMyMeshSmootherExampleTraits::VertexT< Base, Refs > | |
| CMyTraits::VertexT< Base, Refs > | |
| COpenMesh::Subdivider::Adaptive::CompositeTraits::EdgeT< Base, Refs > | |
| COpenMesh::Subdivider::Adaptive::CompositeTraits::FaceT< Base, Refs > | |
| COpenMesh::Subdivider::Adaptive::CompositeTraits::VertexT< Base, Refs > | |
| COpenMesh::Subdivider::Uniform::CompositeTraits::EdgeT< Base, Refs > | |
| COpenMesh::Subdivider::Uniform::CompositeTraits::FaceT< Base, Refs > | |
| COpenMesh::Subdivider::Uniform::CompositeTraits::VertexT< Base, Refs > | |
| COpenMesh::VDPM::MeshTraits::VertexT< Base, Refs > | |
| COpenMesh::Decimater::BaseDecimaterModule | Base class decimater framework |
| COpenMesh::IO::BaseExporter | Base class for exporter modules |
| COpenMesh::IO::ExporterT< Mesh > | This class template provides an exporter module for OpenMesh meshes |
| COpenMesh::BaseHandle | Base class for all handle types |
| COpenMesh::BasePropHandleT< unsigned int > | |
| COpenMesh::EPropHandleT< unsigned int > | |
| COpenMesh::FPropHandleT< unsigned int > | |
| COpenMesh::HPropHandleT< unsigned int > | |
| COpenMesh::VPropHandleT< unsigned int > | |
| COpenMesh::BasePropHandleT< typename Mesh::Point > | |
| COpenMesh::FPropHandleT< typename Mesh::Point > | |
| COpenMesh::BasePropHandleT< level_t > | |
| COpenMesh::VPropHandleT< level_t > | |
| COpenMesh::BasePropHandleT< HalfedgeHandle > | |
| COpenMesh::VPropHandleT< HalfedgeHandle > | |
| COpenMesh::BasePropHandleT< float > | |
| COpenMesh::FPropHandleT< float > | |
| COpenMesh::VPropHandleT< float > | |
| COpenMesh::BasePropHandleT< int > | |
| COpenMesh::VPropHandleT< int > | |
| COpenMesh::BasePropHandleT< Points > | |
| COpenMesh::FPropHandleT< Points > | |
| COpenMesh::BasePropHandleT< OpenMesh::NormalConeT< Normal > > | |
| COpenMesh::FPropHandleT< OpenMesh::NormalConeT< Normal > > | |
| COpenMesh::BasePropHandleT< size_t > | |
| COpenMesh::MPropHandleT< size_t > | |
| COpenMesh::VPropHandleT< size_t > | |
| COpenMesh::BasePropHandleT< OpenMesh::Geometry::QuadricT< double > > | |
| COpenMesh::VPropHandleT< OpenMesh::Geometry::QuadricT< double > > | |
| COpenMesh::BasePropHandleT< Scalar > | |
| COpenMesh::EPropHandleT< Scalar > | |
| COpenMesh::VPropHandleT< Scalar > | |
| COpenMesh::BasePropHandleT< TexCoord > | |
| COpenMesh::VPropHandleT< TexCoord > | |
| COpenMesh::BasePropHandleT< OpenMesh::Attributes::StatusInfo > | |
| COpenMesh::EPropHandleT< OpenMesh::Attributes::StatusInfo > | |
| COpenMesh::FPropHandleT< OpenMesh::Attributes::StatusInfo > | |
| COpenMesh::HPropHandleT< OpenMesh::Attributes::StatusInfo > | |
| COpenMesh::VPropHandleT< OpenMesh::Attributes::StatusInfo > | |
| COpenMesh::BasePropHandleT< typename Mesh::Normal > | |
| COpenMesh::VPropHandleT< typename Mesh::Normal > | |
| COpenMesh::BasePropHandleT< NormalType > | |
| COpenMesh::VPropHandleT< NormalType > | |
| COpenMesh::BasePropHandleT< bool > | |
| COpenMesh::FPropHandleT< bool > | |
| COpenMesh::VPropHandleT< bool > | |
| COpenMesh::BasePropHandleT< Point > | |
| COpenMesh::EPropHandleT< Point > | |
| COpenMesh::FPropHandleT< Point > | |
| COpenMesh::VPropHandleT< Point > | |
| COpenMesh::BasePropHandleT< double > | |
| COpenMesh::EPropHandleT< double > | |
| COpenMesh::BasePropHandleT< typename MeshType::VertexHandle > | |
| COpenMesh::FPropHandleT< typename MeshType::VertexHandle > | |
| COpenMesh::BasePropHandleT< std::pair< typename MeshType::VertexHandle, typename MeshType::VertexHandle > > | |
| COpenMesh::EPropHandleT< std::pair< typename MeshType::VertexHandle, typename MeshType::VertexHandle > > | |
| COpenMesh::BasePropHandleT< typename mesh_t::Point > | |
| COpenMesh::EPropHandleT< typename mesh_t::Point > | |
| COpenMesh::VPropHandleT< typename mesh_t::Point > | |
| COpenMesh::BasePropHandleT< typename MeshType::Point > | |
| COpenMesh::VPropHandleT< typename MeshType::Point > | |
| COpenMesh::Subdivider::Adaptive::RuleHandleT< Self > | |
| COpenMesh::BasePropHandleT< T > | Base property handle |
| COpenMesh::EPropHandleT< StatusInfo > | |
| COpenMesh::EPropHandleT< EdgeData > | |
| COpenMesh::EPropHandleT< Color > | |
| COpenMesh::FPropHandleT< StatusInfo > | |
| COpenMesh::FPropHandleT< FaceData > | |
| COpenMesh::FPropHandleT< Normal > | |
| COpenMesh::FPropHandleT< Color > | |
| COpenMesh::FPropHandleT< TextureIndex > | |
| COpenMesh::FPropHandleT< osg::UInt8 > | |
| COpenMesh::FPropHandleT< osg::UInt32 > | |
| COpenMesh::HPropHandleT< StatusInfo > | |
| COpenMesh::HPropHandleT< HalfedgeData > | |
| COpenMesh::HPropHandleT< TexCoord1D > | |
| COpenMesh::HPropHandleT< TexCoord2D > | |
| COpenMesh::HPropHandleT< TexCoord3D > | |
| COpenMesh::HPropHandleT< Normal > | |
| COpenMesh::HPropHandleT< Color > | |
| COpenMesh::VPropHandleT< StatusInfo > | |
| COpenMesh::VPropHandleT< VertexData > | |
| COpenMesh::VPropHandleT< Normal > | |
| COpenMesh::VPropHandleT< Color > | |
| COpenMesh::VPropHandleT< TexCoord1D > | |
| COpenMesh::VPropHandleT< TexCoord2D > | |
| COpenMesh::VPropHandleT< TexCoord3D > | |
| COpenMesh::VPropHandleT< cog_t > | |
| COpenMesh::EPropHandleT< T > | Handle representing an edge property |
| COpenMesh::FPropHandleT< T > | Handle representing a face property |
| COpenMesh::HPropHandleT< T > | Handle representing a halfedge property |
| COpenMesh::MPropHandleT< T > | Handle representing a mesh property |
| COpenMesh::VPropHandleT< T > | Handle representing a vertex property |
| COpenMesh::EdgeHandle | Handle for a edge entity |
| COpenMesh::SmartEdgeHandle | |
| COpenMesh::FaceHandle | Handle for a face entity |
| COpenMesh::SmartFaceHandle | |
| COpenMesh::HalfedgeHandle | Handle for a halfedge entity |
| COpenMesh::SmartHalfedgeHandle | |
| COpenMesh::MeshHandle | Handle type for meshes to simplify some template programming |
| COpenMesh::Subdivider::Adaptive::RuleHandleT< R > | Handle template for adaptive composite subdividion rules |
| COpenMesh::VDPM::VHierarchyNodeHandle | Handle for vertex hierarchy nodes |
| COpenMesh::VertexHandle | Handle for a vertex entity |
| COpenMesh::SmartVertexHandle | Smart version of VertexHandle contains a pointer to the corresponding mesh and allows easier access to navigation methods |
| COpenMesh::IO::BaseImporter | Base class for importer modules |
| COpenMesh::IO::ImporterT< Mesh > | This class template provides an importer module for OpenMesh meshes |
| CBaseIterator | |
| COpenMesh::FilteredSmartRangeT< RangeT, HandleT, Functor >::FilteredIterator | |
| COpenMesh::BaseKernel | This class provides low-level property management like adding/removing properties and access to properties |
| COpenMesh::Kernel_OSG::PropertyKernel< MeshItems::Face::IsTriangle > | |
| COpenMesh::Kernel_OSG::AttribKernelT< MeshItems > | This class adds the standard properties to the mesh type |
| COpenMesh::ArrayKernel | Mesh kernel using arrays for mesh item storage |
| COpenMesh::Kernel_OSG::PropertyKernel< IsTriMesh > | Helper class, extending functionaliy of OpenMesh::BaseKernel to OpenSG specific property adaptors |
| COpenMesh::BaseMesh | Base class for all meshes |
| COpenMesh::BaseProperty | Abstract class defining the basic interface of a dynamic property |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPositions2d > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPositions2f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPositions3d > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPositions3f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPositions4d > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPositions4f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoNormals3f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoTexCoords1f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoTexCoords2f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoTexCoords3f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoColors3f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoColors3ub > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoColors4f > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoColors4ub > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPTypesUI8 > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoPLengthsUI32 > | |
| COpenMesh::Kernel_OSG::oPropertyT< osg::GeoIndicesUI32 > | |
| COpenMesh::Kernel_OSG::FP::GeoIndicesUI32< IsTriMesh > | Adaptor for osg::GeoIndicesUI32 |
| COpenMesh::PropertyT< bool > | Property specialization for bool type |
| COpenMesh::Kernel_OSG::oPropertyT< GeoProperty > | Property adaptor for OpenSG GeoProperties |
| COpenMesh::PropertyT< T > | Default property class for any type T |
| COpenMesh::PropertyT< bool > | Property specialization for bool type |
| COpenMesh::IO::BaseReader | Base class for reader modules |
| COpenMesh::IO::_OBJReader_ | Implementation of the OBJ format reader |
| COpenMesh::IO::_OFFReader_ | Implementation of the OFF format reader |
| COpenMesh::IO::_OMReader_ | Implementation of the OM format reader |
| COpenMesh::IO::_PLYReader_ | Implementation of the PLY format reader |
| COpenMesh::IO::_STLReader_ | Implementation of the STL format reader |
| COpenMesh::IO::BaseWriter | Base class for all writer modules |
| COpenMesh::IO::_OBJWriter_ | This class defines the OBJ writer |
| COpenMesh::IO::_OFFWriter_ | Implementation of the OFF format writer |
| COpenMesh::IO::_OMWriter_ | Implementation of the OM format writer |
| COpenMesh::IO::_PLYWriter_ | Implementation of the PLY format writer |
| COpenMesh::IO::_STLWriter_ | Implementation of the STL format writer |
| COpenMesh::IO::_VTKWriter_ | |
| COpenMesh::IO::binary< T, typename > | The struct defines how to store and restore the type T |
| COpenMesh::IO::binary< MyData > | |
| COpenMesh::IO::binary< MyMap > | |
| COpenMesh::IO::binary< RegisteredDataType > | |
| Cbinary< std::vector< bool > > | |
| COpenMesh::CirculatorRangeTraitT< CONTAINER_T, ITER_T, CENTER_ENTITY_T, TO_ENTITY_T, begin_fn, end_fn > | |
| CCirculatorT< Mesh > | Circulator |
| CCmdOption< T > | |
| COpenMesh::Subdivider::Uniform::CompositeT< MeshType, RealType >::Coeff | Abstract base class for coefficient functions |
| COpenMesh::Subdivider::Uniform::CompositeT< MeshType, RealType >::Coeff | |
| COpenMesh::Subdivider::Uniform::CompositeLoopT< MeshType, RealType >::EVCoeff | Helper struct |
| COpenMesh::Subdivider::Uniform::CompositeSqrt3T< MeshType, RealType >::FVCoeff | Helper class |
| COpenMesh::Decimater::CollapseInfoT< Mesh > | Stores information about a halfedge collapse |
| COpenMesh::color_caster< osg::Color3f, osg::Color3ub > | Helper struct |
| COpenMesh::color_caster< osg::Color3ub, osg::Color3f > | Helper struct |
| COpenMesh::Subdivider::Uniform::CompareLengthFunction< MeshType, RealType > | |
| COpenMesh::Subdivider::Adaptive::CompositeT< M > | Adaptive Composite Subdivision framework |
| COpenMesh::Subdivider::Uniform::CompositeLoopT< MeshType, RealType >::EVCoeff::compute_weight | |
| COpenMesh::Subdivider::Uniform::CompositeSqrt3T< MeshType, RealType >::FVCoeff::compute_weight | |
| CConnectivity | |
| COpenMesh::AttribKernelT< MeshItems, Connectivity > | The attribute kernel adds all standard properties to the kernel |
| COpenMesh::Iterators::ConstEdgeIterT< Mesh > | |
| COpenMesh::Iterators::ConstFaceIterT< Mesh > | |
| COpenMesh::Iterators::ConstHalfedgeIterT< Mesh > | |
| COpenMesh::ConstPropertyViewer< PropertyT > | |
| COpenMesh::Iterators::ConstVertexIterT< Mesh > | |
| CDecOptions | |
| COpenMesh::DefaultTraits | Base class for all traits |
| CMyTraits | |
| CAnalyzerTraits | |
| CCustomTraits | |
| CCustomTraits | |
| CCustomTraitsVec2i | |
| CCustomTraitsVec2i | |
| CMeshViewerWidgetTraits | |
| CMyDecimaterViewerWidgetTraits | |
| CMyDeleteGeometryExampleTraits | |
| CMyMConvertTraits | |
| CMyMeshSmootherExampleTraits | |
| CMySmoothingTraits | |
| CMyTraits | |
| CMyTraits | |
| COpenMesh::DefaultTraitsDouble | Version of Default Traits that uses double precision for points and normals as well as floating point vectors for colors |
| COpenMesh::Kernel_OSG::Traits | Base class for all mesh traits using the OSGArrayKernelT |
| COpenMesh::Subdivider::Adaptive::CompositeTraits | Adaptive Composite Subdivision framework |
| COpenMesh::Subdivider::Adaptive::Traits | |
| COpenMesh::Subdivider::Uniform::CompositeTraits | Uniform Composite Subdivision framework |
| COpenMesh::VDPM::MeshTraits | Mesh traits for View Dependent Progressive Meshes |
| CProgTraits | |
| COpenMesh::PolyConnectivity::EdgeFaceTraits | |
| COpenMesh::PolyConnectivity::EdgeHalfedgeTraits | |
| COpenMesh::Iterators::EdgeIterT< Mesh > | |
| COpenMesh::Concepts::MeshItems::EdgeT< Refs_ > | Interface for the internal edge type |
| COpenMesh::PolyConnectivity::EdgeVertexTraits | |
| COpenMesh::PolyConnectivity::ElementRange< HandleType > | |
| COpenMesh::PolyConnectivity::ElementRange< EdgeHandle > | |
| COpenMesh::PolyConnectivity::ElementRange< FaceHandle > | |
| COpenMesh::PolyConnectivity::ElementRange< HalfedgeHandle > | |
| COpenMesh::PolyConnectivity::ElementRange< VertexHandle > | |
| COpenMesh::Endian | Determine byte order of host system |
| Cstd::exception | STL class |
| Cstd::runtime_error | STL class |
| CGnuplotException | Exception thrown by class Gnuplot |
| COpenMesh::PolyConnectivity::FaceEdgeTraits | |
| COpenMesh::PolyConnectivity::FaceFaceTraits | |
| COpenMesh::PolyConnectivity::FaceHalfedgeTraits | |
| COpenMesh::Iterators::FaceIterT< Mesh > | |
| COpenMesh::Concepts::MeshItems::FaceT< Refs_ > | Interface for the internal face type |
| COpenMesh::PolyConnectivity::FaceVertexTraits | |
| COpenMesh::FinalMeshItemsT< Traits, IsTriMesh > | Definition of the mesh entities (items) |
| COpenMesh::Iterators::GenericCirculator_CenterEntityFnsT< Mesh, CenterEntityHandle, CW > | |
| COpenMesh::Iterators::GenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::EdgeHandle, CW > | |
| COpenMesh::Iterators::GenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::FaceHandle, false > | |
| COpenMesh::Iterators::GenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::FaceHandle, true > | |
| COpenMesh::Iterators::GenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::VertexHandle, false > | |
| COpenMesh::Iterators::GenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::VertexHandle, true > | |
| COpenMesh::Iterators::GenericCirculator_DereferenciabilityCheckT< Mesh, CenterEntityHandle, ValueHandle > | |
| COpenMesh::Iterators::GenericCirculator_DereferenciabilityCheckT< Mesh, typename Mesh::EdgeHandle, typename Mesh::FaceHandle > | |
| COpenMesh::Iterators::GenericCirculator_DereferenciabilityCheckT< Mesh, typename Mesh::FaceHandle, typename Mesh::FaceHandle > | |
| COpenMesh::Iterators::GenericCirculator_DereferenciabilityCheckT< Mesh, typename Mesh::VertexHandle, typename Mesh::FaceHandle > | |
| COpenMesh::Iterators::GenericCirculator_ValueHandleFnsT< Mesh, CenterEntityHandle, ValueHandle, CW > | |
| COpenMesh::Iterators::GenericCirculator_ValueHandleFnsT< Mesh, CenterEntityHandle, typename Mesh::FaceHandle, CW > | |
| COpenMesh::Iterators::GenericCirculator_ValueHandleFnsT_DEPRECATED< Mesh, CenterEntityHandle, ValueHandle > | |
| COpenMesh::Iterators::GenericCirculator_ValueHandleFnsT_DEPRECATED< Mesh, CenterEntityHandle, typename Mesh::FaceHandle > | |
| COpenMesh::Iterators::GenericCirculatorBaseT< Mesh > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexVertexTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexVertexTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexHalfedgeTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexHalfedgeTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexOppositeHalfedgeTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexOppositeHalfedgeTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexFaceTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexFaceTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexEdgeTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< VertexEdgeTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceHalfedgeTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceHalfedgeTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceVertexTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceVertexTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceEdgeTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceEdgeTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceFaceTraits, true > | |
| COpenMesh::Iterators::GenericCirculatorT< FaceFaceTraits, false > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< VertexVertexTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< VertexHalfedgeTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< VertexOppositeHalfedgeTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< VertexFaceTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< VertexEdgeTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< FaceHalfedgeTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< FaceVertexTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< FaceEdgeTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< FaceFaceTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< EdgeVertexTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< EdgeHalfedgeTraits > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< EdgeFaceTraits > | |
| COpenMesh::Iterators::GenericCirculatorBaseT< GenericCirculatorT_DEPRECATED_TraitsT::Mesh > | |
| COpenMesh::Iterators::GenericCirculatorT_DEPRECATED< GenericCirculatorT_DEPRECATED_TraitsT > | |
| COpenMesh::Iterators::GenericCirculatorBaseT< GenericCirculatorT_TraitsT::Mesh > | |
| COpenMesh::Iterators::GenericCirculatorT< GenericCirculatorT_TraitsT, CW > | |
| COpenMesh::Iterators::GenericIteratorT< Mesh, ValueHandle, MemberOwner, PrimitiveStatusMember, PrimitiveCountMember > | |
| CGnuplot | Utility class interfacing with Gnuplot |
| COpenMesh::Iterators::HalfedgeIterT< Mesh > | |
| COpenMesh::Concepts::MeshItems::HalfedgeT< Refs_ > | Interface for the internal halfedge type |
| COpenMesh::IO::Handle2Prop< T, Handle > | |
| COpenMesh::IO::Handle2Prop< T, FaceHandle > | |
| COpenMesh::IO::Handle2Prop< T, VertexHandle > | |
| COpenMesh::HandleToPropHandle< ElementT, T > | |
| COpenMesh::HandleToPropHandle< OpenMesh::EdgeHandle, T > | |
| COpenMesh::HandleToPropHandle< OpenMesh::FaceHandle, T > | |
| COpenMesh::HandleToPropHandle< OpenMesh::HalfedgeHandle, T > | |
| COpenMesh::HandleToPropHandle< OpenMesh::MeshHandle, T > | |
| COpenMesh::HandleToPropHandle< OpenMesh::VertexHandle, T > | |
| COpenMesh::HandleToPropHandle< void, T > | |
| COpenMesh::Decimater::DecimaterT< MeshT >::HeapInterface | Heap interface |
| COpenMesh::Utils::HeapInterfaceT< HeapEntry > | This class demonstrates the HeapInterface's interface |
| COpenMesh::HoleFiller::HoleFillerT< MeshT > | |
| COpenMesh::Decimater::ModProgMeshT< MeshT >::Info | Struct storing progressive mesh information |
| CIteratorT< Mesh > | Linear iterator |
| COpenMesh::FinalMeshItemsT< Traits, IsTriMesh >::ITraits | |
| CKernel | |
| COpenMesh::PolyMeshT< Kernel > | Base type for a polygonal mesh |
| COpenMesh::TriMeshT< MeshKernel > | |
| COpenMesh::Kernel_OSG::TriMesh_OSGArrayKernelT< Traits > | Triangle mesh based on the Kernel_OSG::ArrayKernelT |
| COpenMesh::TriMeshT< Kernel > | Base type for a triangle mesh |
| COpenMesh::Concepts::KernelT< FinalMeshItems > | This class describes the minimum interface a mesh kernel has to implement (because the resulting mesh will rely on this interface) |
| COpenMesh::LoopSchemeMaskT< T_, cache_size_ > | Implements cache for the weights of the original Loop scheme supported: |
| Cstd::map< K, T > | STL class |
| CRuleMap | |
| COpenMesh::Predicates::MemberFunctionWrapper< T, MF > | Wrapper object to hold an object and a member function pointer, and provides operator() to call that member function for that object with one argument |
| COpenMesh::MergeTraits< _Traits1, _Traits2 > | Helper class to merge two mesh traits |
| COpenMesh::MeshCast< LhsMeshT, RhsMeshT > | Cast a mesh with different but identical traits into each other |
| COpenMesh::MeshCast< const LhsMeshT &, const RhsMeshT & > | |
| COpenMesh::MeshCast< const LhsMeshT *, const RhsMeshT * > | |
| COpenMesh::MeshCast< LhsMeshT &, RhsMeshT & > | |
| COpenMesh::MeshCast< LhsMeshT *, RhsMeshT * > | |
| COpenMesh::Utils::MeshCheckerT< Mesh > | Check integrity of mesh |
| COpenMesh::Concepts::MeshItems | The mesh items class encapsulates the types VertexT, HalfedgeT, EdgeT, and FaceT |
| COpenMesh::Decimater::ModBaseT< MeshT > | Base class for all decimation modules |
| COpenMesh::Decimater::ModIndependentSetsT< Mesh > | |
| COpenMesh::Decimater::ModNormalFlippingT< Mesh > | |
| COpenMesh::Decimater::ModProgMeshT< Mesh > | |
| COpenMesh::Decimater::ModQuadricT< Mesh > | |
| CModBalancerT< Mesh > | |
| COpenMesh::Decimater::ModAspectRatioT< MeshT > | Use aspect ratio to control decimation |
| COpenMesh::Decimater::ModEdgeLengthT< MeshT > | Use edge length to control decimation |
| COpenMesh::Decimater::ModHausdorffT< MeshT > | Use Hausdorff distance to control decimation |
| COpenMesh::Decimater::ModIndependentSetsT< MeshT > | Lock one-ring around remaining vertex after a collapse to prevent further collapses of halfedges incident to the one-ring vertices |
| COpenMesh::Decimater::ModNormalDeviationT< MeshT > | Use Normal deviation to control decimation |
| COpenMesh::Decimater::ModNormalFlippingT< MeshT > | Decimating module to avoid flipping of faces |
| COpenMesh::Decimater::ModProgMeshT< MeshT > | Collect progressive mesh information while decimating |
| COpenMesh::Decimater::ModQuadricT< MeshT > | Mesh decimation module computing collapse priority based on error quadrics |
| COpenMesh::Decimater::ModRoundnessT< MeshT > | Use Roundness of triangles to control decimation |
| COpenMesh::Decimater::ModBaseT< D > | |
| COpenMesh::Decimater::ModQuadricT< D > | |
| CModBalancerT< D > | |
| CMyData | |
| COpenMesh::Utils::Noncopyable | This class demonstrates the non copyable idiom |
| COpenMesh::Decimater::ModHandleT< Self > | |
| COpenMesh::Smoother::Component< Mesh > | |
| COpenMesh::Smoother::Continuity< Mesh > | |
| COpenMesh::Smoother::Scalar< Mesh > | |
| COpenMesh::Smoother::VertexHandle< Mesh > | |
| COpenMesh::Smoother::EdgeHandle< Mesh > | |
| COpenMesh::Subdivider::Uniform::SubdividerT< Mesh > | |
| COpenMesh::Subdivider::Uniform::SubdividerT< MeshType, RealType > | |
| COpenMesh::Subdivider::Uniform::CompositeT< MeshType, RealType > | |
| COpenMesh::Subdivider::Uniform::SubdividerT< mesh_t, real_t > | |
| COpenMesh::Subdivider::Uniform::SubdividerT< MeshType, double > | |
| COpenMesh::Subdivider::Uniform::CompositeT< MeshType, double > | |
| COpenMesh::Subdivider::Uniform::CompositeLoopT< MeshType, RealType > | Uniform composite Loop subdivision algorithm |
| COpenMesh::Subdivider::Uniform::CompositeSqrt3T< MeshType, RealType > | Uniform composite sqrt(3) subdivision algorithm |
| COpenMesh::Subdivider::Uniform::CatmullClarkT< MeshType, RealType > | Based on code from Leon Kos, CAD lab, Mech.Eng., University of Ljubljana, Slovenia (http://www.lecad.fs.uni-lj.si/~leon) |
| COpenMesh::Subdivider::Uniform::InterpolatingSqrt3LGT< MeshType, RealType > | Uniform Interpolating Sqrt3 subdivision algorithm |
| COpenMesh::Subdivider::Uniform::LoopT< MeshType, RealType > | Uniform Loop subdivision algorithm |
| COpenMesh::Subdivider::Uniform::MidpointT< MeshType, RealType > | Midpoint subdivision algorithm |
| COpenMesh::Subdivider::Uniform::Sqrt3T< MeshType, RealType > | Uniform Sqrt3 subdivision algorithm |
| COpenMesh::Subdivider::Uniform::SubdividerT< MeshType, float > | |
| COpenMesh::Subdivider::Uniform::CompositeT< MeshType, RealType > | This class provides the composite subdivision rules for the uniform case |
| COpenMesh::Subdivider::Uniform::CompositeLoopT< CMesh > | |
| COpenMesh::Subdivider::Uniform::CompositeSqrt3T< CMesh > | |
| COpenMesh::Subdivider::Uniform::LongestEdgeT< MeshType, RealType > | Uniform LongestEdgeT subdivision algorithm |
| COpenMesh::Decimater::BaseDecimaterT< MeshT > | |
| COpenMesh::Decimater::DecimaterT< ArrayTriMesh > | |
| COpenMesh::Decimater::DecimaterT< Mesh > | |
| COpenMesh::Decimater::DecimaterT< MeshT > | Decimater framework |
| COpenMesh::Decimater::MixedDecimaterT< MeshT > | Mixed decimater framework |
| COpenMesh::Decimater::McDecimaterT< MeshT > | Multiple choice decimater framework |
| COpenMesh::Decimater::MixedDecimaterT< MeshT > | Mixed decimater framework |
| COpenMesh::Decimater::ModHandleT< Module > | Handle for mesh decimation modules |
| COpenMesh::Smoother::SmootherT< Mesh > | Base class for smoothing algorithms |
| COpenMesh::Smoother::LaplaceSmootherT< Mesh > | Laplacian Smoothing |
| COpenMesh::Smoother::JacobiLaplaceSmootherT< Mesh > | Laplacian Smoothing |
| COpenMesh::Subdivider::Uniform::SubdividerT< MeshType, RealType > | Abstract base class for uniform subdivision algorithms |
| COpenMesh::Subdivider::Uniform::CatmullClarkT< Mesh > | |
| COpenMesh::Subdivider::Uniform::InterpolatingSqrt3LGT< Mesh > | |
| COpenMesh::Subdivider::Uniform::LoopT< Mesh > | |
| COpenMesh::Subdivider::Uniform::Sqrt3T< Mesh > | |
| COpenMesh::Utils::TestingFramework | Helper class for test programms |
| COpenMesh::NormalConeT< Vector > | /class NormalCone NormalCone.hh <OpenMesh/Core/Geometry/NormalConeT.hh> |
| COpenMesh::Utils::NumLimitsT< Scalar > | This class provides the maximum and minimum values a certain scalar type (int, float, or double) can store |
| COpenMesh::Decimater::Observer | Observer class |
| COpenMesh::IO::Options | Set options for reader/writer modules |
| Cstd::pair< T1, T2 > | STL class |
| COption< T > | |
| COpenMesh::Plane3d | Ax + by + cz + d = 0 |
| COpenMesh::VDPM::Plane3d | Ax + by + cz + d = 0 |
| CPMInfo | |
| COpenMesh::PolyConnectivityTag | Connectivity tag indicating that the tagged mesh has polygon connectivity |
| COpenMesh::PolyMesh_ArrayKernel_GeneratorT< Traits > | Helper class to build a PolyMesh-type |
| COpenMesh::Predicates::PredicateBase< PredicateT > | |
| COpenMesh::Predicates::PredicateBase< Boundary > | |
| COpenMesh::Predicates::Boundary | |
| COpenMesh::Predicates::PredicateBase< Conjunction< Predicate1T, Predicate2T > > | |
| COpenMesh::Predicates::Conjunction< Predicate1T, Predicate2T > | |
| COpenMesh::Predicates::PredicateBase< Deleted > | |
| COpenMesh::Predicates::Deleted | |
| COpenMesh::Predicates::PredicateBase< Disjunction< Predicate1T, Predicate2T > > | |
| COpenMesh::Predicates::Disjunction< Predicate1T, Predicate2T > | |
| COpenMesh::Predicates::PredicateBase< Feature > | |
| COpenMesh::Predicates::Feature | |
| COpenMesh::Predicates::PredicateBase< Hidden > | |
| COpenMesh::Predicates::Hidden | |
| COpenMesh::Predicates::PredicateBase< Locked > | |
| COpenMesh::Predicates::Locked | |
| COpenMesh::Predicates::PredicateBase< Negation< PredicateT > > | |
| COpenMesh::Predicates::Negation< PredicateT > | |
| COpenMesh::Predicates::PredicateBase< Predicate< PredicateT > > | |
| COpenMesh::Predicates::Predicate< PredicateT > | |
| COpenMesh::Predicates::PredicateBase< Regular< inner_reg, boundary_reg > > | |
| COpenMesh::Predicates::Regular< 4, 3 > | |
| COpenMesh::Predicates::Regular< 6, 4 > | |
| COpenMesh::Predicates::Regular< inner_reg, boundary_reg > | |
| COpenMesh::Predicates::PredicateBase< Selected > | |
| COpenMesh::Predicates::Selected | |
| COpenMesh::Predicates::PredicateBase< Tagged > | |
| COpenMesh::Predicates::Tagged | |
| COpenMesh::Predicates::PredicateBase< Tagged2 > | |
| COpenMesh::Predicates::Tagged2 | |
| COpenMesh::PropertyContainer | A a container for properties |
| COpenMesh::PropertyCreationManager | Class for adding properties based on strings |
| COpenMesh::PropertyCreator | Base class for property creators |
| COpenMesh::PropertyCreatorImpl< PropertyCreatorT > | Helper class that contains the implementation of the create_<HandleT>_property methods |
| CPropertyHandle | |
| COpenMesh::AutoPropertyHandleT< Mesh, PropertyHandle > | |
| CPropertyHandle_ | |
| COpenMesh::AutoPropertyHandleT< Mesh_, PropertyHandle_ > | |
| COpenMesh::PropertyManager< PROPTYPE, MeshT > | This class is intended to manage the lifecycle of properties |
| COpenMesh::PropHandle< HandleT > | |
| COpenMesh::PropHandle< EdgeHandle > | |
| COpenMesh::PropHandle< FaceHandle > | |
| COpenMesh::PropHandle< HalfedgeHandle > | |
| COpenMesh::PropHandle< MeshHandle > | |
| COpenMesh::PropHandle< VertexHandle > | |
| CQGLWidget | |
| CQGLViewerWidget | |
| CMeshViewerWidgetT< mesh_t > | |
| CDecimaterViewerWidget | |
| CMeshViewerWidgetT< MyMesh > | |
| CMeshViewerWidget | |
| CProgViewerWidget | |
| CMeshViewerWidgetT< Mesh > | |
| CMeshViewerWidgetSubdivider | |
| CMeshViewerWidgetT< VDPMMesh > | |
| COpenMesh::VDPMSynthesizerViewerWidget | |
| CMeshViewerWidgetT< M > | |
| COpenMesh::Geometry::QuadricT< Scalar > | /class QuadricT Geometry/QuadricT.hh |
| CQWidget | |
| CSubdivideWidget | |
| COpenMesh::RandomNumberGenerator | Generate a random number between 0.0 and 1.0 with a guaranteed resolution ( Number of possible values ) |
| COpenMesh::RangeTraitT< CONTAINER_T, ITER_T, begin_fn, end_fn > | |
| CRegisteredDataType | |
| COpenMesh::Subdivider::Adaptive::RuleInterfaceT< M > | Base class for adaptive composite subdivision rules |
| COpenMesh::Subdivider::Adaptive::EF< M > | Composite rule EF |
| COpenMesh::Subdivider::Adaptive::EV< M > | Composite rule EV |
| COpenMesh::Subdivider::Adaptive::EVc< M > | Composite rule EVc |
| COpenMesh::Subdivider::Adaptive::EdE< M > | Composite rule EdE |
| COpenMesh::Subdivider::Adaptive::EdEc< M > | Composite rule EdEc |
| COpenMesh::Subdivider::Adaptive::FE< M > | Composite rule FE |
| COpenMesh::Subdivider::Adaptive::FF< M > | Composite rule FF |
| COpenMesh::Subdivider::Adaptive::FFc< M > | Composite rule FFc |
| COpenMesh::Subdivider::Adaptive::FV< M > | Composite rule FV |
| COpenMesh::Subdivider::Adaptive::FVc< M > | Composite rule FVc |
| COpenMesh::Subdivider::Adaptive::Tvv3< M > | Adaptive Composite Subdivision framework |
| COpenMesh::Subdivider::Adaptive::Tvv4< M > | Topological composite rule Tvv,4 doing a 1-4 split of a face |
| COpenMesh::Subdivider::Adaptive::VE< M > | Composite rule VE |
| COpenMesh::Subdivider::Adaptive::VF< M > | Composite rule VF |
| COpenMesh::Subdivider::Adaptive::VV< M > | Composite rule VV |
| COpenMesh::Subdivider::Adaptive::VVc< M > | Composite rule VVc |
| COpenMesh::Subdivider::Adaptive::VdE< M > | Composite rule VdE |
| COpenMesh::Subdivider::Adaptive::VdEc< M > | Composite rule VdEc |
| COpenMesh::SingletonT< T > | A simple singleton template |
| COpenMesh::SmartBaseHandle | Base class for all smart handle types |
| COpenMesh::SmartEdgeHandle | |
| COpenMesh::SmartFaceHandle | |
| COpenMesh::SmartHalfedgeHandle | |
| COpenMesh::SmartVertexHandle | Smart version of VertexHandle contains a pointer to the corresponding mesh and allows easier access to navigation methods |
| COpenMesh::SmartHandle< HandleT > | |
| COpenMesh::SmartHandle< EdgeHandle > | |
| COpenMesh::SmartHandle< FaceHandle > | |
| COpenMesh::SmartHandle< HalfedgeHandle > | |
| COpenMesh::SmartHandle< VertexHandle > | |
| COpenMesh::SmartHandleBoundaryPredicate< HandleType > | Base class for all smart handle types that contains status related methods |
| COpenMesh::SmartHandleBoundaryPredicate< SmartEdgeHandle > | |
| COpenMesh::SmartEdgeHandle | |
| COpenMesh::SmartHandleBoundaryPredicate< SmartFaceHandle > | |
| COpenMesh::SmartFaceHandle | |
| COpenMesh::SmartHandleBoundaryPredicate< SmartHalfedgeHandle > | |
| COpenMesh::SmartHalfedgeHandle | |
| COpenMesh::SmartHandleBoundaryPredicate< SmartVertexHandle > | |
| COpenMesh::SmartVertexHandle | Smart version of VertexHandle contains a pointer to the corresponding mesh and allows easier access to navigation methods |
| COpenMesh::SmartHandleStatusPredicates< HandleType > | Base class for all smart handle types that contains status related methods |
| COpenMesh::SmartHandleStatusPredicates< SmartEdgeHandle > | |
| COpenMesh::SmartEdgeHandle | |
| COpenMesh::SmartHandleStatusPredicates< SmartFaceHandle > | |
| COpenMesh::SmartFaceHandle | |
| COpenMesh::SmartHandleStatusPredicates< SmartHalfedgeHandle > | |
| COpenMesh::SmartHalfedgeHandle | |
| COpenMesh::SmartHandleStatusPredicates< SmartVertexHandle > | |
| COpenMesh::SmartVertexHandle | Smart version of VertexHandle contains a pointer to the corresponding mesh and allows easier access to navigation methods |
| COpenMesh::SmartRangeT< RangeT, HandleT > | Base class for all smart range types |
| COpenMesh::SmartRangeT< CirculatorRange< CirculatorRangeTraitT >, SmartHandle< CirculatorRangeTraitT::TO_ENTITYE_TYPE >::type > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexVertexIter, VertexHandle, VertexHandle, &PolyConnectivity::cvv_begin, &PolyConnectivity::cvv_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexIHalfedgeIter, VertexHandle, HalfedgeHandle, &PolyConnectivity::cvih_begin, &PolyConnectivity::cvih_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexOHalfedgeIter, VertexHandle, HalfedgeHandle, &PolyConnectivity::cvoh_begin, &PolyConnectivity::cvoh_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexEdgeIter, VertexHandle, EdgeHandle, &PolyConnectivity::cve_begin, &PolyConnectivity::cve_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexFaceIter, VertexHandle, FaceHandle, &PolyConnectivity::cvf_begin, &PolyConnectivity::cvf_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceVertexIter, FaceHandle, VertexHandle, &PolyConnectivity::cfv_begin, &PolyConnectivity::cfv_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceHalfedgeIter, FaceHandle, HalfedgeHandle, &PolyConnectivity::cfh_begin, &PolyConnectivity::cfh_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceEdgeIter, FaceHandle, EdgeHandle, &PolyConnectivity::cfe_begin, &PolyConnectivity::cfe_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceFaceIter, FaceHandle, FaceHandle, &PolyConnectivity::cff_begin, &PolyConnectivity::cff_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstEdgeVertexIter, EdgeHandle, VertexHandle, &PolyConnectivity::cev_begin, &PolyConnectivity::cev_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstEdgeHalfedgeIter, EdgeHandle, HalfedgeHandle, &PolyConnectivity::ceh_begin, &PolyConnectivity::ceh_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstEdgeFaceIter, EdgeHandle, FaceHandle, &PolyConnectivity::cef_begin, &PolyConnectivity::cef_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstHalfedgeLoopIter, HalfedgeHandle, HalfedgeHandle, &PolyConnectivity::chl_begin, &PolyConnectivity::chl_end > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexVertexCWIter, VertexHandle, VertexHandle, &PolyConnectivity::cvv_cwbegin, &PolyConnectivity::cvv_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexIHalfedgeCWIter, VertexHandle, HalfedgeHandle, &PolyConnectivity::cvih_cwbegin, &PolyConnectivity::cvih_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexOHalfedgeCWIter, VertexHandle, HalfedgeHandle, &PolyConnectivity::cvoh_cwbegin, &PolyConnectivity::cvoh_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexEdgeCWIter, VertexHandle, EdgeHandle, &PolyConnectivity::cve_cwbegin, &PolyConnectivity::cve_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexFaceCWIter, VertexHandle, FaceHandle, &PolyConnectivity::cvf_cwbegin, &PolyConnectivity::cvf_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceVertexCWIter, FaceHandle, VertexHandle, &PolyConnectivity::cfv_cwbegin, &PolyConnectivity::cfv_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceHalfedgeCWIter, FaceHandle, HalfedgeHandle, &PolyConnectivity::cfh_cwbegin, &PolyConnectivity::cfh_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceEdgeCWIter, FaceHandle, EdgeHandle, &PolyConnectivity::cfe_cwbegin, &PolyConnectivity::cfe_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceFaceCWIter, FaceHandle, FaceHandle, &PolyConnectivity::cff_cwbegin, &PolyConnectivity::cff_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstHalfedgeLoopCWIter, HalfedgeHandle, HalfedgeHandle, &PolyConnectivity::chl_cwbegin, &PolyConnectivity::chl_cwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexVertexCCWIter, VertexHandle, VertexHandle, &PolyConnectivity::cvv_ccwbegin, &PolyConnectivity::cvv_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexIHalfedgeCCWIter, VertexHandle, HalfedgeHandle, &PolyConnectivity::cvih_ccwbegin, &PolyConnectivity::cvih_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexOHalfedgeCCWIter, VertexHandle, HalfedgeHandle, &PolyConnectivity::cvoh_ccwbegin, &PolyConnectivity::cvoh_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexEdgeCCWIter, VertexHandle, EdgeHandle, &PolyConnectivity::cve_ccwbegin, &PolyConnectivity::cve_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstVertexFaceCCWIter, VertexHandle, FaceHandle, &PolyConnectivity::cvf_ccwbegin, &PolyConnectivity::cvf_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceVertexCCWIter, FaceHandle, VertexHandle, &PolyConnectivity::cfv_ccwbegin, &PolyConnectivity::cfv_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceHalfedgeCCWIter, FaceHandle, HalfedgeHandle, &PolyConnectivity::cfh_ccwbegin, &PolyConnectivity::cfh_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceEdgeCCWIter, FaceHandle, EdgeHandle, &PolyConnectivity::cfe_ccwbegin, &PolyConnectivity::cfe_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstFaceFaceCCWIter, FaceHandle, FaceHandle, &PolyConnectivity::cff_ccwbegin, &PolyConnectivity::cff_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT< PolyConnectivity, ConstHalfedgeLoopCCWIter, HalfedgeHandle, HalfedgeHandle, &PolyConnectivity::chl_ccwbegin, &PolyConnectivity::chl_ccwend > > | |
| COpenMesh::CirculatorRange< CirculatorRangeTraitT > | Generic class for iterator ranges |
| COpenMesh::SmartRangeT< EntityRange< RangeTraitT >, RangeTraitT::ITER_TYPE::SmartHandle > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstVertexIter, &PolyConnectivity::vertices_begin, &PolyConnectivity::vertices_end > > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstVertexIter, &PolyConnectivity::vertices_sbegin, &PolyConnectivity::vertices_end > > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstHalfedgeIter, &PolyConnectivity::halfedges_begin, &PolyConnectivity::halfedges_end > > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstHalfedgeIter, &PolyConnectivity::halfedges_sbegin, &PolyConnectivity::halfedges_end > > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstEdgeIter, &PolyConnectivity::edges_begin, &PolyConnectivity::edges_end > > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstEdgeIter, &PolyConnectivity::edges_sbegin, &PolyConnectivity::edges_end > > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstFaceIter, &PolyConnectivity::faces_begin, &PolyConnectivity::faces_end > > | |
| COpenMesh::EntityRange< RangeTraitT< const PolyConnectivity, PolyConnectivity::ConstFaceIter, &PolyConnectivity::faces_sbegin, &PolyConnectivity::faces_end > > | |
| COpenMesh::EntityRange< RangeTraitT > | Generic class for vertex/halfedge/edge/face ranges |
| COpenMesh::SmartRangeT< FilteredSmartRangeT< RangeT, HandleT, Functor >, HandleT > | |
| COpenMesh::FilteredSmartRangeT< RangeT, HandleT, Functor > | Class which applies a filter when iterating over elements |
| COpenMesh::SmartTaggerT< Mesh, EHandle, EPHandle > | Smart Tagger |
| COpenMesh::SmartTaggerT< Mesh, Mesh::EdgeHandle, OpenMesh::EPropHandleT< unsigned int > > | |
| COpenMesh::SmartTaggerET< Mesh > | |
| COpenMesh::SmartTaggerT< Mesh, Mesh::FaceHandle, OpenMesh::FPropHandleT< unsigned int > > | |
| COpenMesh::SmartTaggerFT< Mesh > | |
| COpenMesh::SmartTaggerT< Mesh, Mesh::HalfedgeHandle, OpenMesh::HPropHandleT< unsigned int > > | |
| COpenMesh::SmartTaggerHT< Mesh > | |
| COpenMesh::SmartTaggerT< Mesh, Mesh::VertexHandle, OpenMesh::VPropHandleT< unsigned int > > | |
| COpenMesh::SmartTaggerVT< Mesh > | |
| CCompositeTraits::State | Storage type for intermediate states and the final flag of a mesh entity |
| COpenMesh::Subdivider::Adaptive::CompositeTraits::State | Storage type for intermediate states and the final flag of a mesh entity |
| COpenMesh::Subdivider::Adaptive::State | |
| COpenMesh::Attributes::StatusInfo | Add status information to a base class |
| COpenMesh::ArrayKernel::StatusSetT< HandleT > | — StatusSet API — |
| COpenMesh::ArrayKernel::AutoStatusSetT< VertexHandle > | |
| COpenMesh::ArrayKernel::ExtStatusSetT< VertexHandle > | |
| COpenMesh::ArrayKernel::AutoStatusSetT< EdgeHandle > | |
| COpenMesh::ArrayKernel::ExtStatusSetT< EdgeHandle > | |
| COpenMesh::ArrayKernel::AutoStatusSetT< FaceHandle > | |
| COpenMesh::ArrayKernel::ExtStatusSetT< FaceHandle > | |
| COpenMesh::ArrayKernel::AutoStatusSetT< HalfedgeHandle > | |
| COpenMesh::ArrayKernel::ExtStatusSetT< HalfedgeHandle > | |
| COpenMesh::ArrayKernel::AutoStatusSetT< HandleT > | AutoStatusSetT: A status set that automatically picks a status bit |
| COpenMesh::ArrayKernel::ExtStatusSetT< HandleT > | ExtStatusSet: A status set augmented with an array |
| COpenMesh::ArrayKernel::StatusSetT< Handle > | |
| COpenMesh::ArrayKernel::AutoStatusSetT< Handle > | |
| COpenMesh::StripifierT< Mesh > | This class decomposes a triangle mesh into several triangle strips |
| Ctesting::Test | |
| COpenMeshBase | |
| COpenMeshBasePoly | |
| COpenMeshBasePolyVec2i | |
| COpenMeshBaseTriVec2i | |
| COpenMesh::Utils::Timer | Timer class |
| CTimer | Timer class |
| COpenMesh::TriConnectivityTag | Connectivity tag indicating that the tagged mesh has triangle connectivity |
| COpenMesh::TriMesh_ArrayKernel_GeneratorT< Traits > | Helper class to create a TriMesh-type based on ArrayKernelT |
| COpenMesh::Kernel_OSG::TriMesh_OSGArrayKernel_GeneratorT< Traits > | Helper class to create a TriMesh-type based on Kernel_OSG::ArrayKernelT |
| CCustom::Vec< DIM > | A Vector class with the absolute minimum of built-in methods to test the interface expected from Vectors used in Traits |
| Cstd::vector< T > | STL class |
| COpenMesh::Utils::HeapT< VertexHandle, HeapInterface > | |
| COpenMesh::Utils::HeapT< HeapEntry, HeapInterface > | An efficient, highly customizable heap |
| COpenMesh::vector_caster< osg::Vec3d, osg::Pnt3d > | Convert Pnt3d to Vec3d |
| COpenMesh::vector_caster< osg::Vec3f, osg::Pnt3f > | Convert Pnt3f to Vec3f |
| COpenMesh::vector_caster< osg::Vec4d, osg::Pnt4d > | Convert Pnt4d to Vec4d |
| COpenMesh::vector_caster< osg::Vec4f, osg::Pnt4f > | Convert Pnt4f to Vec4f |
| COpenMesh::vector_traits< T > | Helper class providing information about a vector type |
| COpenMesh::vector_traits< Custom::Vec< DIM > > | |
| COpenMesh::vector_traits< Eigen::Matrix< _Scalar, _Rows, _Cols, _Options > > | |
| COpenMesh::vector_traits< osg::Color3f > | Vector traits for OpenSG color type |
| COpenMesh::vector_traits< osg::Color3ub > | Vector traits for OpenSG color type |
| COpenMesh::vector_traits< osg::Color4f > | Vector traits for OpenSG color type |
| COpenMesh::vector_traits< osg::Color4ub > | Vector traits for OpenSG color type |
| COpenMesh::vector_traits< osg::Pnt2d > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Pnt2f > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Pnt3d > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Pnt3f > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Pnt4d > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Pnt4f > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Vec2f > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Vec3d > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Vec3f > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Vec4d > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Vec4f > | Vector traits for OpenSG vector type |
| COpenMesh::vector_traits< osg::Vec4ub > | Vector traits for OpenSG vector type |
| CVectorDataT | |
| CVectorT< float, 4 > | |
| CVectorT< float, 3 > | |
| CVectorT< Scalar, N > | |
| COpenMesh::VectorT< Scalar, DIM > | |
| COpenMesh::PolyConnectivity::VertexEdgeTraits | |
| COpenMesh::PolyConnectivity::VertexFaceTraits | |
| COpenMesh::PolyConnectivity::VertexHalfedgeTraits | |
| COpenMesh::Iterators::VertexIterT< Mesh > | |
| COpenMesh::PolyConnectivity::VertexOppositeHalfedgeTraits | |
| COpenMesh::Concepts::MeshItems::VertexT< Refs_ > | Interface for the internal vertex type |
| COpenMesh::PolyConnectivity::VertexVertexTraits | |
| COpenMesh::VDPM::VFront | Active nodes in vertex hierarchy |
| COpenMesh::VFront | Active nodes in vertex hierarchy |
| COpenMesh::VDPM::VHierarchy | Keeps the vertex hierarchy build during analyzing a progressive mesh |
| COpenMesh::VHierarchy | Keeps the vertex hierarchy build during analyzing a progressive mesh |
| COpenMesh::VDPM::VHierarchyNode | Vertex hierarchy node |
| COpenMesh::VHierarchyNode | Vertex hierarchy node |
| COpenMesh::VDPM::VHierarchyNodeIndex | Index of vertex hierarchy node |
| COpenMesh::VHierarchyNodeIndex | Index of vertex hierarchy node |
| COpenMesh::VDPM::VHierarchyWindow | |
| COpenMesh::VDPM::ViewingParameters | |
| COpenMesh::ViewingParameters | |
